Changing Audio Language During Playback (Multi-Audio); Changing The Subtitle Language During Playback (Multi-Subtitle); Changing The Viewing Angle During Playback (Multi-Angle); Return To The Specified Scene - Pioneer AVH-3300BT Operation Manual

Detailed instructions
Changing audio language
during playback (Multi-audio)
With DVDs/DivX files that provides audio play-
back in different languages and different
audio systems (Dolby Digital, DTS, etc.), you
can switch between languages/audio systems
during playback.
Notes
! With some DVDs, switching between lan-
guages/audio systems may only be possible
using a menu display.
! You can also switch between languages/audio
systems using Video Setup menu. For details,
refer to Setting the audio language on page 58.
! Only digital output of DTS audio is possible. If
the unit's optical digital outputs are not con-
nected, select an audio setting other than
DTS.
! Depending on the setting, the video may not
be played back with the audio system used to
record the DVD.
! You will return to normal playback if you
change the Audio during fast forward/fast re-
wind, pause or slow motion playback.
Changing the subtitle
language during playback
(Multi-subtitle)
With DVDs/DivX files featuring multi-subtitle
recordings, you can switch between subtitle
languages during playback.
Notes
! With some DVDs, switching between subtitle
languages may only be possible using a menu
display.
! You can also switch between subtitle lan-
guages using Video Setup menu. For details,
refer to Setting the subtitle language on page
58.
! You will return to normal playback if you
change the Subtitle during fast forward/fast
rewind, pause or slow motion playback.
Changing the viewing angle
during playback (Multi-angle)
With DVDs featuring multi-angle (scenes shot
from multiple angles) recordings, you can
switch among viewing angles during play-
back.
! During playback of a scene shot from mul-
tiple angles, the angle icon is displayed.
Use the Video Setup menu to turn the
angle icon display on or off. For details,
refer to Setting the multi-angle DVD display
on page 59.
Note
You will return to normal playback if you change
the viewing angle during fast forward/fast rewind,
pause or slow motion playback.

Return to the specified scene

(Function for DVD video)
This function cannot be used if a specified
scene has not been preprogrammed on the
DVD disc.

Selecting audio output

When playing DVD video discs recorded with
LPCM audio, you can switch the audio output.
When playing video CDs, you can switch be-
tween stereo and monaural audio output.
! This function is not available when disc
playback is stopped.
! If you select Linear PCM, you can operate
this function when playing a disc recorded
on a dual mono mode. (Refer to Setting for
digital output on page 61.)
! L+R – left and right
! Left – left
! Right – right
! Mix – mixing left and right
Section
12
33
En