Panasonic Viera TX-P42GT50B Operating Instructions Manual page 38

3D Settings
If the 3D images are not displayed correctly or seem unusual, adjust and setup the 3D settings.
■
To return to TV
Item
2D 3D Depth
3D Adjustment
Picture
Sequence
Edge Smoother
3D Detection
3D Signal
Message
Safety
Precautions
Note
●
[3D Adjustment] and [Picture Sequence] will not be memorised when changing the input mode or channel.
38
Display the menu
1
Select [Picture]
2
Picture
Select [3D Settings]
3
P-NR
3D Settings
Screen Display
Advanced Settings
Reset to Defaults
Select one of the following functions and set
4
3D Settings
2D 3D Depth
3D Adjustment
Picture Sequence
Edge Smoother
3D Detection
3D Signal Message
Safety Precautions
Adjustments / Configurations (alternatives)
Selects a level of 3D-image depth for viewing converted 2D images [Min] / [Mid] / [Max]
Adjustment of the 3D effect (except in [2D 3D] mode) [Off] / [On]
●
Set to [On] to enable [Effect] setting.
●
When setting to [On], a safety precaution message will appear. Read it carefully and press the
BACK/RETURN button to go to [Effect] setting.
[Effect]: Adjusts the 3D depth according to the contents or to your preference.
Select [Reverse] if you feel that the sense of depth is unusual (except in [2D 3D] mode)
[Normal] / [Reverse]
Set to [On] if you feel the contoured parts of an image are not smooth enough (except in [2D
3D] mode) [Off] / [On]
Automatically detects the 3D format signals [Off] / [On] / [On (Advance)]
[On (Advance)]: Detects all the 3D format signals and displays the 3D image automatically.
[On]: Detects the particular 3D format signals (Frame Sequential, etc.) and displays the 3D
image automatically.
●
To view 3D images without any notifications and operations, set to [On (Advance)].
Selects whether to give a notification message when a signal of 3D format is found [Off] / [On]
●
For DVB, Component and HDMI input
● This function is not available when [3D Detection] is set to [On (Advance)].
Displays the precautions for viewing 3D images
2/2
Off
Access
On
Mid
Access
Normal
Off
On
On
Access
select
access
select
access
select
adjust
access / store