Panasonic Viera TX-P42GT50B Operating Instructions Manual page 108

■
Applicable HDMI features
●
Input audio signal:
2ch Linear PCM (sampling frequencies - 48 kHz, 44.1 kHz, 32 kHz)
●
Input video signal:
"Input signal that can be displayed" (p. 109)
Match the output setting of the digital equipment.
● Input PC signal:
"Input signal that can be displayed" (p. 109)
Match the output setting of the PC.
■
DVI connection
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adaptor cable ∗
When the DVI to HDMI adaptor cable is used, connect the audio cable to AUDIO terminal with the supplied AV2
(COMPONENT / VIDEO) adaptor.
Note
●
Audio settings can be made on [HDMI1 / 2 / 3 / 4 Input] in the Sound Menu. (p. 43)
●
If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9".
● These HDMI connectors are "type A".
●
These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.
●
Equipment having no digital output terminal may be connected to the input terminal of component or video to receive
analogue signals.
● This TV incorporates HDMI™ technology.
∗ 1: The HDMI logo is displayed on HDMI-compliant equipment.
∗ 2: Audio Return Channel (ARC) is a function to send digital sound signals via an HDMI cable.
∗ 3: Enquire at your local digital equipment retailer shop.
USB connection
●
It is recommended to connect the USB HDD, USB Flash Memory or Communication Camera to the TV's USB ports
directly.
● Some USB devices or USB HUB may not be used with this TV.
●
You cannot connect any devices by using USB card reader.
●
You cannot use two or more same kind of USB devices simultaneously except USB Flash Memory or USB HDD.
●
Additional information for the devices may be on the following website.
http://panasonic.jp/support/global/cs/tv/
Bluetooth Setup
You can use Bluetooth keyboards ∗
[Bluetooth Setup] in the Setup Menu (p. 45).
∗ 1: HID (Human Interface Device Profile) compliant keyboards are available.
∗ 2: A2DP (Advanced Audio Distribution Profile) compliant audio devices are available.
Menu Item
Devices
Bluetooth Audio
Settings
●
This setup is not for the 3D Eyewear supporting Bluetooth wireless technology.
●
Additional information for the devices may be on the following website.
http://panasonic.jp/support/global/cs/tv/
108
and Bluetooth audio devices ∗
1
Adjustments / Configurations (alternatives)
Searches and registers the available devices
●
You cannot use two or more A2DP compliant audio devices simultaneously.
[Not paired]: The device is not registered. Register the device by following the
on-screen instructions to use with this TV.
[Connected]: The device is registered and you can use with this TV.
[Not connected]: The device is already registered, but not connected to this TV.
Check the device is turned on and the available range.
Adjusts the delay time if the sound of the audio device does not synchronise the
image
●
This function is available only for the Bluetooth audio devices.
●
Set [Lip Sync] to [On] and adjust in [Lip Sync Adjustment].
●
VIERA Link (HDAVI Control 5)
[VIERA Link] (p. 95)
●
3D
●
Content Type
●
Deep Colour
● x.v.Colour™
Audio Return Channel ∗
●
(HDMI2 terminal only)
(headphones, etc.) with this TV by setting
2
2
.
3