Panasonic Viera TX-P42GT50B Operating Instructions Manual page 122

Receiving systems /
Band name
Check the latest
information on the
available services at
the following website.
http://panasonic.jp/
support/global/cs/tv/
Satellite dish input
Aerial input
Operating conditions
AV1 input / output
AV2 input
(COMPONENT /
VIDEO)
HDMI 1 / 2 / 3 / 4
input
122
freesat services via Satellite dish input.
Receiver frequency range - 950 MHz to 2,150 MHz
LNB Power and Polarisation - Vertical: +13 V
DVB-S / S2
( )
freesat
22 kHz Tone - Frequency: 22 kHz ± 2 kHz
Other Sat.
Symbol Rate - Max. 30 MS/s
FEC Mode - 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
Demodulation - QPSK, 8PSK
Not available for DiSEqC control.
DVB-T / T2 Digital terrestrial services.
PAL I UHF E21 - 68
Playback of NTSC tape from some PAL Video recorders (VCR)
PAL 525/60
or NTSC disc playback from DVD player and recorder.
M.NTSC Playback from M.NTSC Video recorders (VCR).
NTSC
Playback from NTSC Video recorders (VCR).
(AV input only)
Receiver frequency range - 950 MHz to 2,150 MHz
LNB Power and Polarisation - Vertical: +13 V
DVB-S / S2 22 kHz Tone - Frequency: 22 kHz ± 2 kHz
Symbol Rate - Max. 30 MS/s
FEC Mode - 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
Demodulation - QPSK, 8PSK
Not available for DiSEqC control.
DVB-T Digital terrestrial services.
VHF A - J
PAL I
CATV S1 - S20
Playback of NTSC tape from some PAL Video recorders (VCR)
PAL 525/60
or NTSC disc playback from DVD player and recorder.
M.NTSC Playback from M.NTSC Video recorders (VCR).
NTSC
Playback from NTSC Video recorders (VCR).
(AV input only)
Female F-type 75 Ω
UHF
Temperature: 0 °C - 35 °C
Humidity: 20 % - 80 % RH (non-condensing)
SCART (Audio/Video in, Audio/Video out, RGB in, Q-Link)
VIDEO RCA PIN Type × 1
AUDIO L - R RCA PIN Type × 2
Y 1.0 V[p-p] (including synchronisation)
P , P ±0.35 V[p-p]
B R
TYPE A Connectors
HDMI1 / 3 / 4: 3D, Content Type, Deep Colour, x.v.Colour™
HDMI2: 3D, Content Type, Audio Return Channel, Deep Colour, x.v.Colour™
●
This TV supports "HDAVI Control 5" function.
Horizontal: +18 V
Current: Max. 500 mA (overload
Amplitude: 0.6 V ± 0.2 V
Horizontal: +18 V
Current: Max. 500 mA (overload
Amplitude: 0.6 V ± 0.2 V
UHF E21 - E69
CATV S21 - S41 (Hyperband)
VHF / UHF
1.0 V[p-p] (75 Ω)
0.5 V[rms]
protection)
protection)