Table of Contents
Advertisement
Dealing with Problems
Display
It is hard to view the LCD.
The cursor cannot be con-
trolled.
The cursor does not prop-
erly correspond to a stylus
tap.
30
The LCD backlight may have automatically turned off
due to the power-saving function. Turn on the LCD
backlight by holding down the power switch for 0.5 -
1.0 sec.
Adjust the backlight brightness.
1 Tap [Start] - [Settings] - [Control Panel] in order, and
then double-tap [Backlight].
2 Tap the [Brightness] tab and adjust the brightness with
the slider.
Position a lamp so that the light shines directly on the
screen.
Restart the computer by pressing the reset switch.
Perform calibration (
page 16).
Advertisement
Table of Contents
