Panasonic KX-TG8321E Operating Instructions Manual page 33

TG8321E(e-e).book Page 33 Monday, March 3, 2008 2:33 PM
L The handset does not beep when
cancelling its own registration.
6
{ih}
Cancelling a base unit
A handset can cancel a base unit that it
is registered to. This allows the base unit
to end its wireless connection with the
system.
1
K (centre of joystick) i N i
M
2
{V}/{^}: "Registration" i
M
3
{3}{3}{5}
4
{V}/{^}: "Cancel Base" i M
5
Select the base unit(s) you want to
cancel by pressing the desired base
unit number. i M
L The selected base unit number(s)
flashes.
L To cancel a selected base unit
number, press the number again.
The number stops flashing.
6
{V}/{^}: "Yes" i M i {ih}
Note:
L To register a handset to another base
unit or to the same base unit again,
see page 32.
Increasing the range of the
base unit
You can increase the signal range of the
base unit by using a DECT repeater.
Please use only the Panasonic DECT
repeater noted on page 4. Contact your
Panasonic dealer for details.
Important:
L Before registering the repeater to this
base unit, you must turn the repeater
mode on.
L Do not use more than one repeater at
a time.
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Programming
Setting the repeater mode
1
K (centre of joystick) i ! i
M
2
{V}/{^}: "Repeater Mode" i
M
3
{V}/{^}: Select the desired setting.
i M i {ih}
Note:
L After turning the repeater mode on or
off, w flashes on the handset
momentarily. This is normal and the
handset can be used once w stops
flashing.
33