Device Manager; System Setup - Panasonic Toughbook CF-71 Series Operating Instructions Manual

4
When the message [Press F1 for Setup] is dis-
played, press F1 and then run the Setup Utility.
5
Select [Load Default Settings (PnP)], then press
Enter .
At the confirmation message, press Enter .
In [Power Management], set [Power Saving] to
6
[OFF] and set [Sleep Switch] to [No Action], press
Esc .
7
Save the settings and then close the Setup Utility.
The computer will reboot, and will then return to
the display shown in step 1 .
Windows 95
(reinstalling)
3 Select [3. Restore the HDD to factory default].
4 At the confirmation message, press any key.
5 When your computer prompts you to insert the
FIRSTAID CD, please set the specified CD and press
any key.
6 When your computer prompts you to insert the "Win-
dows 95 CD-ROM", please set the specified CD and
press any key.
7 When the [To continue, press ENTER...] appears,
press Enter .
After Microsoft ScanDisk completes, the computer
will automatically return to the Windows 95 setup.
Simply follow the on-screen instructions .
NOTE
With the exception of the instruction below, please
select all default values displayed by the Setup
Wizard. Be sure to add the check mark
MIDI, or Video Capture Card] at the [Analyzing
Your Computer].
Have a floppy disk on hand to create a "Windows
95 Startup Disk". Immediately after creating this
disk, enter the FIRSTAID FD into the floppy disk
drive and press [OK]. (Note: A system error will
result if the FIRSTAID FD is not inserted. If this
occurs, insert the FIRSTAID FD and press [Retry].)
8 At the [Finishing Setup], remove the floppy disk and
press [Finish]. Windows will restart after all the set-
tings have automatically been made.
9 At the [Date/Time Properties], press [Close].
10 At the [Add Printer Wizard], press [Cancel].
11 When the display appears indicating the establish-
ment of the system settings, press [OK]. The com-
puter will reboot.

System setup

12 In [Start] - [Run], input [c:\install.bat], then press
[OK]. Rebooting will be done automatically.
It may take several minutes to reboot the computer.
13 In [Start] - [Programs] - [Windows Explorer], delete
the "c:\install.bat" and "c:\install.pif" files.

Device manager 1

14 In [Start] - [Settings] - [Control Panel] - [System] -
[Device Manager], select [PCIC or compatible
PCMCIA controller] in [PCMCIA socket]. Remove
the check for [Disable in this hardware profile] in
[Properties] - [General] and then press [OK].
15 Press [Next] at the display for the [Welcome to the
PC Card (PCMCIA) Wizard], press [Next] again and
then press [Finish].
16 The display will ask you to restart Windows, press
[No].
17 Check [View devices by connection] at [Device Man-
ager] and select [PCI bus] in [Plug and Play BIOS],
press [Remove], then press [OK]. The display will
ask you to restart Windows, press [Yes]. Rebooting
will be done automatically. If the computer asks you
to insert the Windows 95 Disk, press [OK]. Input
[c:\cabs], then press [OK].
Then, when the [Version Conflict] appears, select
[Yes].
18 Press [Next] at the [Update Device Driver Wizard of
Standard PCI Graphics Adapter (VGA)] and [Finish].
The display will ask you to restart Windows, press
[Yes].
19 Press [Next] at the [Update Device Driver Wizard of
PCI Universal Serial Bus] and [Finish].
The display will ask you to restart Windows, press
[Yes].
Sound driver
20 In [Control Panel] - [System] -[Device Manager], for
each item in [Sound, video and game controller], press
[Remove] to delete it, then press [OK] to confirm the
to [Sound,
deletion.
At the message to restart the computer (only once),
select [No].
21 Press [Refresh] and press [Next] at the [Update De-
vice Driver Wizard of Unknown Devices].
22 Select [Other Locations], input [c:\util\drivers\sound],
then press [OK].
23 At the [Update Device Driver Wizard of YAMAHA
OPL3-SAx Sound System], press [Finish].
Video driver
24 In [Device Manager] - [Display adapters] - [Standard
PCI Graphics Adapter (VGA)] - [Driver] - [Update
Driver], select [Yes (Recommended).], then press
[Next].
25 Select [Other Locations], input [c:\util\drivers\video],
press [OK], then press [Finish]. The display will ask
you to restart Windows, then press [Yes].
Touch pad driver
26 In [Start] - [Settings]- [Control Panel] - [Mouse] - [Gen-
e r a l ] - [ C h a n g e ] - [ H a v e D i s k ] , i n p u t
[c:\util\drivers\mouse] and press [OK]. Select [touch
pad], press [OK] and then press [Close]. The display
will ask you to restart Windows, then press [Yes].
21