List Of Error Codes - Panasonic Toughbook CF-71 Series Operating Instructions Manual

List of Error Codes

Code
062 Boot failure--default configuration used
101 System Board Failure
102 System Board Failure
106 System Board Failure
114 Adapter ROM Error
151 System Board Failure
161 Bad CMOS Battery
162 Configuration Change Has Occurred
162 Configuration Error
163 Date and Time Incorrect
173 Configuration Change Has Occurred
201 Memory Size Error
301 Keyboard Error
303 Keyboard Error
604 Diskette Drive Error
605 Diskette Drive Error
1780 Hard Disk Error
1800 PCI Error
1801 PCI Error
1802 PCI Error
1803 PCI Error
1804 PCI Error
1805 PCI Error
1962
8603 Pointing Device Error
I9990301
I9990305
If a problem occurs with your hardware, and [POST Startup Error(s)] is displayed along with
the error code(s), follow the on-screen instructions.
Setup: Setup Utility (
Rerun the Setup Utility to input the appropriate operating environment settings.
Exit: Ignore the error message(s), and restart the computer.
"Setup Utility") is started. Run [Load Default Settings (PnP)].
Description
Default configuration in use
Interrupt controller failure
Timer 2 test failure
Diskette controller failure
Adapter ROM checksum error
Real-time clock failure
Dead battery
Configuration error
CMOS checksum error
Real-time clock is not updating
ROM configuration has changed
Memory size/data error
Keyboard failure
Keyboard controller failure
Diskette drive 0 failure
Diskette unlocked problem
Fixed disk 0 failure
No more IRQs available
No more room for optional ROM
No more I/O space available
No more memory (above 1 MB) available
No more memory (below 1 MB) available
Checksum error or 0 size optional ROM
An operating system could not be found
Pointing device failure
Hard disk failure
An operating system could not be found
17