Panasonic DVD-S35 Operating Instructions Manual page 26

General playback
Position memorized
Position cleared
26
POSITION MEMORY
Use the Position Memory
position.
The position tag is retained when you change discs or when the unit goes into stand-by
mode.
You can tag and directly access up to 5 discs.
This function is available only if the elapsed playback time is displayed when playing the
disc.
!
Press POSITION MEMORY
!
The "Position memorized" box will be displayed.
!
You can now press to go into stand-by mode or change discs.
!
Press PLAY to replay the disc again. Playback will be resumed at the stored position
and the position tag will be cleared.
D
Some discs do not fully support all of this function.
Chapter review
This function lets you browse back through the chapters of a DVD-V by playing the first
couple of seconds of every chapter.
!
Press STOP during playback.
!
Press PLAY . Screen "Press PLAY to Chapter Review" is displayed.
!
Press PLAY . The first couple of seconds of every chapter are played back.
Normal playback will be resumed at the point where you stopped it.
!
Do not press PLAY if you do not wish to browse back through the chapters.
After a couple of seconds, normal playback will be automatically resumed at the point
where it was stopped.
DVD-V DVD-A
function if you wish to resume disc playback at a particular
during playback.
RAM VCD CD MP3 WMA WMA WMA JPEG WMA WMA
DVD-V