Realtek Audio
Realtek Audio
Installing the VIA Audio Driver
You need to install the audio driver for VIA audio codec to function properly before you
can get access to 2-, 4-, 6-, 8- channel or 7.1+2 channel audio operations. Follow the
procedures described below to install the drivers for different operating systems.
Installation for Windows
For Windows
XP, you must install Windows
®
ing the driver.
The following illustrations are based on Windows
slightly different if you install the drivers in different operating systems.
1.
Insert the application DVD into the DVD-ROM drive. The setup screen will automati-
cally appear.
2.
Click VIA Audio Drivers button.
3.
Click Next to install the VIA Audio Driver.
Important
The HD Audio Configuration software utility is under continuous update to enhance au-
dio applications. Hence, the program screens shown here in this section may be slightly
different from the latest software utility and shall be held for reference only.
A-2
XP
®
XP Service Pack 2 or later before install-
®
XP environment and could look
®
Click here