MSI 890FXA-GD70 series User Manual page 65

▶ Adjust CPU-NB Rato
Ths tem s used to adjust CPU-NB rato.
▶ Adjusted CPU-NB Frequency (MHz)
It shows the adjusted CPU NB frequency. Read-only.
▶ Unlock CPU Core
Ths tem s used to unlock the CPU core. Please refer to the procedures below for CPU
core unlocked n BIOS setup.
Enter "Cell Menu" and set "Unlock CPU Core" to [Enabled].
Save changes and ext the BIOS setup.
System restart.
Success
You wll see the "X4" (quad core) or "X2" (dual core for
Sempron seres only) durng POST.
AMD Phenom(tm) II X4 Processor
AMD Sempron(tm) II X2 Processor
Important
• Ths CPU core unlocked behavor depends on the CPU ablty/ characterstc, and t
s not guaranteed.
• Depend on CPU's characterstc, once you get nstable scenaro, please restore the
default settngs for system.
You can also check the core numbers n performance tab of Wndows task man-
•
ager.
▶ CPU Core Control
Ths tem allows you to select the number of actve processor cores.
▶ OC Gene Lte
Settng ths tem to [Enabled] allows the system to detect the maxmum FSB clock and
to overclock automatcally. If overclockng fals to run, you can try the lower FSB clock
for overclockng successfully.
▶ OC Dal Functon
Ths tem allows you to enable/dsable the OC Dal functon. Settng to [Enabled] act-
vates the followng fields, and use the followng fields to set each OC Dal functon.
Set "Adjust CPU-NB Rato" and
"HT Lnk Speed" to [x8].
Clear CMOS data.
Fal
The CPU does not support CPU core
unlock, please leave the default settngs
for system.
MS-7640 MS-7640
3-21