Adjusting The Warming Plate Temperature; Cleaning The Coffeemaker Between Brew Cycles; Maintaining Your Coffeemaker; Cleaning The Coffeemaker - Mr. Coffee EC15 User Manual

Ec series
Table of Contents

Advertisement

Available languages

Available languages

Adjusting the Warming Plate Temperature

(Models ECX30 and ECX33)
You can adjust the warming plate temperature
to five different settings, from warm to very hot.
To adjust the warming plate temperature:
Press the MIN. button to lower the temperature
of the warming plate. Press the MAX. button
to raise the temperature of the warming plate.

Cleaning the Coffeemaker Between Brew Cycles

To clean up the used coffee grounds and filter:
1)
Discard the grounds and paper filter and rinse the
filter basket. You may also wash the filter basket in
the dishwasher.
2)
Rinse the decanter with warm water. You may also
wash the decanter in the dishwasher (top rack
dishwasher safe only).
Make sure the Coffeemaker is turned off when
the decanter is empty.
Brewed coffee and grounds are both very hot.
Handle them with care to avoid scalding injuries.
Unplug the Coffeemaker's power cord if you
are not using the Coffeemaker or clock.
14

Maintaining Your Coffeemaker

Maintaining your Coffeemaker and its parts will help extend the life of the appliance.

Cleaning the Coffeemaker

Your Coffeemaker must be cleaned when you notice any of the follow conditions:
• excessive steaming
• increased brew cycle times
• the pumping action stops before all of the water has been pumped
from the water reservoir
These conditions are caused by lime or other mineral deposits.
How frequently you clean your Coffeemaker depends upon the hardness of your
tap water. The following table gives suggested cleaning intervals.
Type of Water
Cleaning frequency
Soft water
Every 80 brew cycles
Hard water
Every 40 brew cycles
To clean mineral deposits from your Coffeemaker:
1)
Pour four cups of undiluted white
household vinegar into the water reservoir.
2)
Place a paper filter into the removable
filter basket and close the brew basket lid.
3)
Place the empty decanter on the
warming plate.
Make sure to center the decanter
accurately on the warming plate
to avoid the possibility of overflow.
4)
Start the brew cycle.
15

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Ec17

Table of Contents