Operation
Warning!
The motor switches itself off as soon as the mixing
e
jug
is removed from the motor block
then be overlooked that the appliance is still swit-
ched on. The motor will thus start of its own accord
as soon as the mixing jug
Therefore:
• First insert the power plug into the wall socket
when the mixer jug
its lid fitted and closed.
• Before mounting the mixing jug always check to
see that the appliance is switched off or that the
power plug has been removed.
• Before removing the mixer jug
pliance off, remove the power plug and wait for
the motor to stop revolving.
Filling and mounting the mixer jug
➩
ake the mixer attachment
u
and remove the lid
➩
IFill the mixer attachment
w
lid
firmly back onto the mixer attachment
➩
Insert the filling cap
secure it by turning it clockwise.
➩
Place the ready filled and sealed mixer jug
onto the motor block
e
jug
until you can press it down. The motor
can start only when the mixer jug
positioned.
u
. It could
e
is replaced on it:
e
is filled and mounted with
e
, switch the ap-
e
from the motor unit
w
.
e
and then press the
q
into the lid opening and
u
. Lightly turn the mixer
e
is securely
Selecting operating speeds
When the mixer jug
and securely fitted to the motor block
then switch the appliance on.
➩
Place the switch
– Level 1-3
for fluid or soft foodstuffs, for mixing, blending
and stirring
– Level 3-5
for firmer foodstuffs or for hacking
– Level Ice Crush/Clean
for short, powerful impulse operation, e.g. the
crushing of ice cubes, grinding of hard foodstuffs
or for cleaning. So as not to overburden the
motor, the switch
sition. Hence, hold the switch
for short periods only.
Notice
Fill the mixer attachment
180 g of ice cubes. If filled with more than this, the
appliance cannot optimally crush them.
Filling when in use
e
.
Warning!
Should you wish to insert further foodstuffs during
e
operation, you may ONLY open the filling cap
provided for this purpose.
• Under no circumstance should you open the lid
w
. Pieces of the foodstuff could be thrown out at
high speeds!
• Do not insert cutlery items or mixing tools into
the mixing jug
There is a considerable risk of injury should these
make contact with the swiftly rotating cutters
To insert something when the appliance is in
operation, ...
➩
turn the filling cap
ve it.
➩
Afterwards, replace the filling cap
lid and secure it by turning it clockwise.
- 4 -
e
is filled, completely sealed
u
, you can
t
on ...
t
does not engage in this po-
t
in this position
e
with a maximum of
e
when the appliance is in use.
q
anti-clockwise and remo-
q
q
r
!
into the