Table of Contents
Advertisement
CD Operation
Notes:
– If the total playing time is more than "99:59"
or if one of the programmed tracks has a number
greater than 30, then "--:--" will appear on the
display instead of the total playing time.
– If you attempt to programme more than 40
tracks, "PROGRAM FULL" will be displayed.
– If you press any of the CD DIRECT 1/2/3
buttons on the remote control, the system will play
the selected disc or track, and the stored
programme will be ignored temporarily. The
symbol also will disappear temporarily
PROGRAM
from the display. It will reappear when playback of
the selected disc ends.
– During programming, if no key is pressed within
20 seconds, the system will exit the Programme
mode automatically.
To review the programme
Stop playback and press í or ë repeatedly.
To exit review mode, press Ç.
To erase the entire programme
Press Ç once when playback is stopped or
twice during playback.
"PROGRAM CLEARED" will be displayed.
will disappear from the display.
PROGRAM
Note:
– The programme will be erased when the system
is disconnected from the power supply or when the
disc tray is opened.
Repeat
The current track, a disc, all available discs or all
programmed tracks can be played repeatedly.
1
Press REPEAT on the remote control
repeatedly to select various repeat modes.
In normal playback
"TRACK" – to repeat the current track,
will appear on the display.
REPEAT
"DISC" – to repeat the entire disc,
and
will appear on the display.
DISC
"ALL DISC" – to repeat all available discs,
,
and
REPEAT
DISC
ALL
18
REPEAT
will appear on the display.
In programme playback
"TRACK" – to repeat the current
programmed track,
appear on the display.
"PROGRAM" – to repeat all programmed
tracks,
,
REPEAT
PROGRAM
appear on the display.
The selected track/disc(s)/programme will now
be played repeatedly until you press Ç.
2
To resume normal playback, press REPEAT
until the "OFF" mode is displayed.
will disappear from the display.
REPEAT
Notes:
– Selecting SHUFFLE during repeat playback will
cancel all repeat modes.
– Pressing any CD OPEN•CLOSE button will
cancel all repeat modes.
Shuffle
All the available discs and their tracks or all the
programmed tracks can be played in random
order.
1
Press SHUFFLE on the remote control.
will appear on the display.
SHUFFLE
The discs and the tracks will be played in
random order until you press Ç.
2
To resume normal playback, press SHUFFLE
again.
will disappear from the display.
SHUFFLE
When select REPEAT mode during
shuffling
In normal shuffled playback
"TRACK" – to repeat shuffling the current
track.
"ALL DISC" – to repeat shuffling all
available discs.
In programme shuffled playback
"TRACK" – to repeat shuffling the current
programmed track.
"PROGRAM" – to repeat shuffling all
programmed tracks.
Note:
– Pressing any CD OPEN•CLOSE button will
cancel shuffle mode.
For Recording, please refer to "Tape
Operation/Recording".
and
will
REPEAT
PROGRAM
,
and
will
DISC
ALL
Advertisement
Table of Contents
Troubleshooting
