Table of Contents
Advertisement
3
Then hold the phone upside down and place
your forefinger on the connectors. Press the
two inner clips with your left fingers as
shown opposite (1) and pull the cover from
the top while pushing the inside part of the
phone with your forefinger still on the
connectors (2).
L
Make sure you handle the product with care when
the front is removed, in order not to damage the
joystick key which is then unprotected, and also try
not to touch the screen Do not turn on your mobile
phone when front and back covers are removed.
4
Remove the keypad and place it in the front
cover that will replace the one you just
removed.
5
Put the new front cover on your phone:
hook the front housing onto the hinges on
the top of the phone (1), then press the
bottom down until the latches catch (2).
6
Slide the battery pack into its slots,
connectors downwards, until it stops.
Getting
started
7
Advertisement
Table of Contents
