Table of Contents
Advertisement
GPRS settings
Allows you to change the GPRS settings as described below
GPRS settings
Login
Password
APN
L
Homepage
Allows you to enter the WAP address of the homepage, the first page
Homepage
displayed when accessing the WAP services. Select
,
and press
Bearer
Allows you to select the type of network used when launching a WAP
Bearer
session.
GSM
GPRS
GPRS first
Login
Allows you to enter the login needed. Select
enter the login and press
Password
Allows you to enter the password needed. Select
,
, enter the password and press
APN
Allows you to enter the address of the external data network you
want to connect to, a text string or an IP address (e.g.,
wap.operatorname.fr) used to establish the connection with your
WAP Service Provider (ISP). Select
the approriate address and press
Error messages during WAP connections are mainly due to incorrect
parameters: you should contact your operator before first use, in order to
have the appropriate WAP and GPRS parameters. With some operators,
WAP access parameters can be set remotely. Please check directly by your
operator.
. Then enter the URL address of the homepage (e.g. www.philips.com)
,
.
GSM
Your mobile will only use the GSM network for WAP connections.
GPRS
Your mobile will only use the GPRS network for WAP connections.
GPRS first
Your mobile will first try to connect to the GPRS network, then to the
GSM network if the GPRS one isn't available when launching WAP.
,
.
,
.
APN
and press
,
.
WAP services
,
Login
and press
Password
and press
,
, then enter
Homepage
and press
71
,
Advertisement
Table of Contents
