Poor radio reception
•
Due to the interference from other electrics or building obstacles,
the signals become weak. Move the product to a place free of
interference.
•
Make sure that the antenna is fully extended. Adjust the position of
the antenna.
Clock setting is erased.
•
Power has been interrupted, or the AC power cord has been
disconnected.
•
Set the clock again.
12
Product information
Note
•
Product information is subject to change without prior notice.
Amplifier
Frequency Response
Signal to Noise Ratio
Aux Input
60 Hz - 16 kHz, ±3 dB
> 65 dBA
0.5 V RMS 20 kohm