Product Information; Troubleshooting - Philips 1000 Series User Manual

5
Product
information
Note
•
Product information is subject to change without prior
notice.
Power
Battery type
Battery voltage
Number of batteries
Tuner/Reception/Transmission
Tuner bands
Sound
Sound system
Volume control
Output power
Connectivity
Audio/Video output
General information
Dimensions
(W x H x D)
Weight
(Main unit)
AAA size(LR3)
1.5V
2
FM 88 - 108 MHz
MW 530 - 1700 KHz
Mono
Rotary (analogue)
100 mW RMS
Headphones
(3.5mm)
56 x 116.2 x 22 mm
88 g
6

Troubleshooting

Warning
•
Never remove the casing of the product.
To keep the warranty valid, never try to repair
the device yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips webpage (www.philips.
com/support). When you contact Philips, make
sure that the device is nearby and the model
number and serial number are available.
No sound /power
– Volume not adjusted
• Adjust the VOLUME.
– Batteries dead/ incorrectly inserted
• Insert (fresh) batteries correctly
– Headphones connected to the set
• Disconnect headphones.
Poor radio reception
– Weak radio signal
• For FM, extend, incline and turn the telescopic
antenna for best reception. Reduce its length if
the signal is too strong.
• For MW, the set uses a built-in antenna. Direct
this antenna for best reception by turning the
whole set.
• When inserting new batteries, do not try to mix
old batteries with the new ones.
• Remove the batteries if the set is not to be used
for a long time. Batteries contain chemical
substances, so they should be disposed of
properly.
EN 6