Table of Contents
Advertisement
WARNING
The electronic circuits inside the flash contain
high voltage working parts. Never attempt to
disassemble the flash unit yourself.
Never touch internal parts of the flash unit if
they become exposed from dropping the
camera or for some other reason, as there is
danger of an electric shock.
Do not expose the flash unit to water or
moisture. This is to prevent electrical shock.
2
CAUTION
Do not use the flash near anyone's eyes, as it
may hurt them. Be particularly careful with the
flash around infants.
Never try to disassemble, short or recharge
the battery. Also, do not dispose of the battery
in fire, as it may explode.
Misuse of the battery can cause hazards such
as leakage, overheating, explosion, etc. The
battery should be inserted with the "+" and "-"
sides facing correctly.
Remove the batteries from the camera
immediately if they become hot or begin to
smoke. Be careful not burn yourself during
removal.
PRECAUTIONS FOR YOUR FLASH UNIT
• When using the flash unit off the camera, do not try to attach any metallic object to the electric
contacts or to mount incompatible accessories. Otherwise, the TTL auto mechanism may be
damaged or rendered inoperable. Use only compatible Pentax accessories.
• Never use solvents such as paint thinner, alcohol or benzene to clean the flash unit.
• Avoid leaving the flash unit for extend period in places where the humidity and temperature are
very high such as in a car.
• Be careful not to subject the flash unit to strong vibrations, shock or pressure. Use a cushion to
protect the flash unit when carrying it in a motorcycle, car, boat, etc.
• Shield the flash unit from salty air and water at the beach, splashing liquid of any kind, and rain.
When the flash unit is subjected to rain or moisture, wipe it off with a dry soft.
• Replace the batteries at the same time. Do not mix battery brands, type or an old battery with a
new one. It may cause explosion or overheating.
• Remove the batteries when not using for extended periods. Leakage of fluids may result and
cause damage to inside of the flash unit.
3
Advertisement
Table of Contents
