Table of Contents
Advertisement
Using two AF360FGZ flash units with one
attached to the camera.
R
Setting both flash units for main flash
1
Attach the AF360FGZ flash unit to the camera.
q Set the flash unit's power switch to
WIRELESS.
w Set the wireless mode switch to [M].
42
Flash unit on camera
35
mm
MASTER
A.Zoom
P-TTL
mm
3
1
2
e Set the flash zoom position to match the lens
focal length. This will be automatically set
when using auto focus lenses with [A.
Zoom]. Set with the flash zoom button for
other lenses.
WIRELESS FLASH
35
SLAVE
mm
P-TTL
mm
M.Zoom
5
6
3
4
1
2
2
Place the other AF360FGZ flash unit(s) at the
desired location(s).
q Set the flash unit's power switch to
WIRELESS.
w Set the wireless mode switch to [S].
e Slide down the setting switch to [yellow dot].
Next, press the channel button [CH] and set
the same channel as the AF360FGZ being
attached then slide the setting switch back
up.
r Press the flash mode button and set the
flash mode to P-TTL mode.
t Set the zoom position to Manual [M. Zoom]
y Check that the flash unit on the camera and
the slave flash unit(s) are ready, then take
the picture.
• The two flash units must be set to the same
channel otherwise the flash unit separated
from the camera will not fire.
43
Advertisement
Table of Contents
