Pentax OPTIO VS20 Operating Manual page 96

0-sec Remote
h
Control
3
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45) to select i and press
the four-way controller (3).
3
Use the four-way controller (45)
to select i or h and press the
4 button.
The self-timer lamp begins to blink slowly
and the camera is ready to take a picture
with the remote control.
4
Point the remote control at the remote control receiver
and press the shutter release button on the remote
control.
The focus frame turns green when the subject is in focus and the
camera takes a picture at the following timing.
When i (Remote Control) is selected:
When h (0-sec Remote Control) is selected:
94
The shutter will be released immediately when the shutter
release button on the remote control unit is pressed.
The self-timer lamp blinks quickly and the camera takes a
picture after about three seconds.
The camera takes a picture immediately.
Shutter release button
Four-way controller
4 button
Shutter release button
for vertical shooting
Drive Mode Drive Mode Drive Mode
Remote Control Remote Control Remote Control
Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel
MENU MENU MENU MENU MENU
OK OK OK
OK