Monitor Indications - Pentax OPTIO VS20 Operating Manual

Monitor Indications

Display in A Mode
The display shows information such as the camera settings in the
capture mode.
The display changes in the following sequence each time you press the
4/W button: Normal Display, Detailed Display, Show Grid, No
Info, Electronic Level Display.
Electronic Level Display
• When the shooting mode is set to 9 (Green)
mode, the monitor display is as shown on the
right. You cannot change the information on the
display by pressing the 4/W button.
• The electronic level display appears only
when the electronic level on the [A Rec.
Mode] menu is set to O (On) (p.119).
20
Normal Display
38 38
02/02/2012
14:25 14:25
Detailed Display
Show Grid
No Info
38 38 38
16
M
AWB AWB
200 200
2012/10/10
14:25
38 38 38