Compensating For An Unwanted Red-Eye Effect - Pentax OPTIO VS20 Operating Manual

Compensating for an Unwanted Red-eye Effect

You can correct images where the flash has caused the subject to
appear with red eyes.
1
Enter the Q mode and use the four-way controller
(45) to choose the image you want to correct.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select Z (Red-eye
Compensation).
5
4
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a
new image and the following confirmation dialog does not appear.
5
Use the four-way controller (23)
to select [Overwrite] or [Save as].
6
Press the 4 button.
The processed image is saved with the same number of recorded
pixels as the original.
162
Red-eye Compensation 1/2 Red-eye Compensation
For compensating red-eye.
May not work due to the
condition of the image
Cancel
MENU
Overwrite Overwrite Overwrite
original image? original image? original image?
Overwrite
Save as
Cancel
1/2
OK
OK
OK OK OK
OK