Adjusting The Picture To The Desired Setting - Panasonic PT-D9510E Operating Instructions Manual

Adjusting the picture to the desired setting

The following procedures can be used to adjust the picture to the desire appearance.
Adjustment procedure ... Adjusting the COLOUR setting
Adjustment Item Operation
Press the [ ] button.
COLOR
Press the [ ] button.
Press the [ ] button.
TINT
Press the [ ] button.
Press the [ ] button.
BRIGHT
Press the [ ] button.
Press the [ ] button.
CONTRAST
Press the [ ] button.
NOTE
• If approximately five seconds pass without any buttons being pressed while an individual adjustment
screen is being displayed, the display will return to the PICTURE screen.
Press the MENU button. ... The MENU screen will be displayed.
Press the UP ( ) and DOWN (
Press the ENTER button. ... The PICTURE screen will be displayed.
Press the UP ( ) and DOWN (
Press the ENTER button. ... The COLOR individual adjustment screen will be
displayed.
Use the control level buttons (
*1.The functions of the LEFT (
depending on the adjustment item selected. Refer to the table below for details.
If you would like to adjust the BRIGHT, CONTRAST and TINT settings, repeat
steps , and .
*2.If adjusting the BRIGHT and CONTRAST settings, the individual adjustment
screens can be displayed by pressing the respective buttons on the remote
control unit.
Adjustment Details
The colour becomes pastel.
The colour becomes more intense.
Flesh tones become greenish.
Flesh tones become reddish.
The screen becomes brighter.
The screen becomes darker.
The bright areas become brighter.
The bright areas become darker.
) arrow buttons to select PICTURE.
) arrow buttons to select COLOR.
and ) to adjust the COLOUR setting level.
) and RIGHT ( ) arrow buttons change
Adjustment Range
Max. value 100
Min. value 0
Max. value 60
Min. value 0
Max. value 63
Min. value 0
Max. value 63
Min. value 0
Remarks
55