Mitsubishi Electric NM-C130FD Installation And Operation Manual page 23

① TITLE
Select the camera TITLE that may be composed of letters, numbers, special texts, or a
combination of these up to 15 digits.
→
←
CLR
POS
END
NOTE: If the wrong name has been input....
If you press the ENTER button after moving the cursor the CLR, all the letters
will be erased. If you want to correct a letter, please move the cursor to the
arrow at the bottom left of the screen and press 'ENTER'.
Please position the cursor above the letter you wish to correct, and then move
the cursor onto the letter you wish to choose and press the ENTER button.
② DISPLAY
ON: Display TITLE in the monitor.
OFF: Disappear TITLE in the monitor.
③ DEFAULTS
The factory setting of the Camera is selected.
④ SAVE
The changed Baud Rate is saved.
⑤ END
Move to left
Move to right
Erase all character
Change the position of the title (If you want to change the position of the
title, press ENTER button at the POS. Find the position you wish to display
the title by using the 4 directional buttons, and then press the ENTER
button.)
End
- 17 -