Table of Contents
Advertisement
3. Press the LEFT or RIGHT button if you wish to change mode.
•
When the LEFT or RIGHT button is pressed, available values and modes are displayed
in order.
Please keep pressing the button until you get to the mode you wish to operate.
4. To finishing the setting without save, select 'END' and then press the ENTER button. But if
you want to keep the setting, enter the CAM SET menu, select 'SAVE' and then press the
ENTER button.
NOTE: If ' - - -' appears at the mode item, it means that is no mode available
to be selected.
3.1.2 WB
Press the MENU button to access the "WB" mode.
① -----------------------------
② -----------------------------
③ -----------------------------
④ -----------------------------
① MODE
ATW (Auto Tracking White Balance)
This mode can be used within the color temperature range 1,800°K ~ 10,500°K
AWC (Auto White Balance Control)
Please press the MENU button while the camera is directed at a piece of white paper to
obtain the optimum state under current illumination. If the environment including the light
source is changed, you have to adjust the white balance again.
MANUAL
The manual adjustment mode enables finer adjustment. You can adjust the RED and BLUE
color values while monitoring the color changes on the object at the 'R GAIN' or 'B GAIN'
menu. The 'R GAIN' and 'B GAIN' is available only at the MANUAL mode.
WHITE BAL.
MODE
ATW / AWC
R GAIN |--------|--------|
R GAIN |--------|--------|
END
- 10 -
/ MANUAL
1 ~70
1 ~70
Advertisement
Table of Contents
