Advanced Features - Mitsubishi Electric XD550U User Manual

Advanced features

Displaying a user-defi ned image
during startup or muting
You can display your desired image as the startup
screen (or splash screen). Using the menu, you can
also use it as the background that is displayed while
the video is muted or no signal is input.
Important:
• You can't select Image Capture when the
component video signal is input.
Procedure
(See page 21 for menu setting.)
1. Press the COMPUTER button to select the image
input to the COMPUTER/COMPONENT VIDEO IN
terminal.
2. Display your desired image.
3. Display the Option menu.
4. Select Image Capture by pressing the  or 
button.
Image Capture
5. Press the ENTER button.
• When the capture starts, the captured image will
be displayed.
• When you press ENTER button once, any button
doesn't function until the capture completes.
• When image resolution is lower than XGA (1024
x 768), the image is captured by adjusting its
resolution to XGA.
• When image resolution is higher than XGA (1024
x 768), the image area of XGA is only captured.
Important:
• The captured images will be deleted at the same
time as pressing the ENTER button. If you pressed
ENTER button wrongly, try to capture the same
images again.
• The captured image is displayed from the next
startup. If the captured image isn't displayed,
check to see if Splash Screen in the Option menu is
set to Off. (See page 27.)
• To display the captured image while the video is
muted, set AV Mute Mode in the Option menu to
Image User. (See page 27.)
• When Back Color in the Option menu is set to
Image User, the captured image is displayed while
no signal is input.
• Some images can't be captured correctly because
of their signal type.
OK
EN-46
Freeze
To stop the motion in the image temporarily (or to
display a still image):
Press the FREEZE button on the remote control.
• The image freezes temporarily.
To resume the motion in the image:
Press the FREEZE button on the remote control again.
Important:
• Do not keep displaying a still picture for an
extended period of time, as the afterimages may
linger on the screen.
Magnify
By pressing the MAGNIFY button on the remote
control, you can magnify the image to view the details.
• The MAGNIFY mode doesn't function with some
input signals. For details, see page 59.
• The MAGNIFY mode doesn't work with video or
S-video signal.
To use the MAGNIFY mode:
1. Press the MAGNIFY button.
• You can select the area to be magnifi ed by
pressing the , ,  or  button on the
remote control.
• You can change the magnifi cation of the
selected area by pressing the VOLUME  or 
button.
2. Press the MAGNIFY button again to exit the
MAGNIFY mode.
• The regular operation screen will appear.
Important:
• In the MAGNIFY mode, you can't adjust the
volume.
Magnifi ed image