Advanced Features - Mitsubishi Electric HC3 User Manual

Advanced features

Setting of the image displayed during
startup or muting
You can display your desired image as the startup
screen (or splash screen). Using the menu, you can also
use such image as a background that is displayed
while no signal is supplied.
Setting procedure
1. Press the COMPUTER button to select the image
supplied to the COMPUTER/COMPONENT
VIDEO IN terminal.
2. Display your desired image.
3. Display the INSTALLATION menu.
4. Select IMAGE CAPTURE by pressing the { or }
button.
5. Press the ENTER button.
• The setting menu will be displayed.
opt.
INSTALLATION
CUSTOM IMAGE CAPTURE
BACK COLOR
SIZE
CAPTURE
Set the background color
(Set the background color only when you set the
image size to x1 or x2.)
6. Select BACK COLOR by pressing the { or }
button.
7. Select your desired color for the background
(GRAY, RED, GREEN, BLUE, BLACK, WHITE,
RED50%, GREEN50%, or BLUE50%) by pressing
the $ or % button.
Set the image size
8. Select SIZE by pressing the { or } button.
9. Select x1, x2, or FULL by pressing the $ or %
button.
HC3 HC3
x1 x2
Capture the image
10.Select CAPTURE by pressing the { or } button.
11.Press the ENTER button.
• A red frame appears. (The size of the red
frame is 295x222 pixels.)
CAPTURE : ENTER + ENTER
CANCEL : MENU
XGA60
GRAY
x1
GO
HC3
HC3 HC3
FULL
HC3
HC3
CAPTURE : ENTER X2
CANCEL : MENU
12. Adjust the size of the image to be captured so that
such image stays within the red frame.
• Press the {, }, $, or % button to move the
red frame.
• You can't move the red frame outside the
screen.
HC3
HC3
CAPTURE : ENTER X2
CANCEL : MENU
13.Press the ENTER button twice.
• Image capture will start.
• Press the MENU button to cancel the proce-
dure.
Capturing Logo !
LVP-XD300 LVP-XD300
• When the image capture completes, the cap-
tured image will be displayed for three sec-
onds.
Important:
• You can't change the new startup screen back to
the original startup screen. (Even when you
select RESET ALL in the FEATURE menu, the
factory default screen isn't available any longer.)
When you want to change the startup screen
again, capture another image.
• The captured image will be displayed from the
next startup. If the captured image isn't dis-
played, make sure that the setting of SPLASH
SCREEN in the INSTALLATION menu isn't OFF.
(See page 16.)
• When BACK COLOR in the INSTALLATION
menu is set to IMAGE, the captured image will be
displayed while no signal is supplied.
• Some images can't be captured correctly because
of their signal type.
EN – 21