Panasonic SC-BTT282 Operating Instructions Manual page 40

The sides are cut
off so the picture
fills the screen.
4:3
When playing
BD-Video, video is output as "4:3
Letterbox".
Black bands
4:3
appear at the top
Letterbox
and bottom of the
picture.
When connected to a 16:9 widescreen
television and playing 4:3 ratio image:
Video is displayed as a 4:3 ratio
16:9
image in the centre of the screen.
TV System
Perform the setup so it matches the TV System
of the connected TV.
≥ [BTT282] When NTSC contents are played,
they are outputted in the signal format
specified in the "NTSC Contents Output",
irrespective of the settings here. (
Screen Saver Function
This is to prevent burn-in on the screen.
≥ When this is set to "On":
If a list of playback content is displayed and
there is no operation for 10 minutes or more,
the screen switches to HOME menu
automatically.
≥ While playing and pausing, etc., this function
is not available.
On-Screen Messages
Choose whether to show status messages
automatically.
VIERA Link
Set to use "HDAVI Control" function when
connected via HDMI cable to a device that
supports "HDAVI Control".
≥ Select "Off" when you do not want to use
"HDAVI Control".
Power Off Link
Select the desired power off link setting of this
unit for VIERA Link operation (
works depending on the settings of the
connected VIERA Link "HDAVI Control"
compatible equipment.)
40
VQT3Z99
∫ Unit Settings
Press [OK] to show the following settings:
Changes the brightness of the unit's display.
≥ If "Automatic" is selected, the display is set to
Change the user information registered in the
HOME menu.
∫ Quick Start
Speed of startup from standby mode is increased.
≥ When set to "On", the internal control unit will be
powered and the idle power consumption will
37)
increase so compared to when set to "Off".
(About the power consumption
∫ Remote Control
Change the remote control code if other
Panasonic products react to this remote control.
∫ Firmware Update (
Press [OK] to show the following settings:
When this equipment remains connected to the Internet,
it will check for the latest firmware version when it is
turned on and you can update it if necessary.
You can update the firmware manually if a
firmware update is available.
∫ System Information
Press [OK] to show the following settings:
Information about the software used by this unit
is displayed.
28). (This
Display firmware version of this unit and
wireless LAN module.
Video/Audio
When the TV is turned off, this unit will turn off
automatically.
Video
When playing back audio only content, the
unit will not turn off automatically.
Front Panel Display
bright and only dimmed during playback.
Edit User Information
Automatic Update Check
Update Now
Software Licence
Firmware Version Information
48)
20)