Speaker Settings; Enjoying Sound Effects From All Speakers - Panasonic SC-BTT282 Operating Instructions Manual

∫ DivX Registration
You need this registration code to purchase and
play DivX Video-on-Demand (VOD) content.
∫ Default Settings
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of network, ratings, remote control
code, language, etc.

Speaker settings

∫ Adjusting speaker level
(Effective when playing multi-channel audio)
1
Select "Test" and press [OK].
A test signal is output.
2
While listening to the test signal
Press [3, 4] to adjust the volume of
subwoofer ( ).
dB
0
The volume can be adjusted between r6 dB
to s6 dB.
3
Press [OK].
The test signal stops.
L
Complete
Test
A Test
To finish the speaker setting
Press [3, 4, 2, 1] to select "Complete" and
press [OK].
Enjoying sound effects
from all speakers
For more details on each setting, refer to "Sound
Settings" on the Option menu. (
1 Press [SURROUND].
2 While the mode is displayed
∫ Adjusting speaker level during play
1 Press [CH SELECT] to activate the speaker
2 Press [CH SELECT] several times to select
3 Press [3] (increase) or [4] (decrease) to
1 Press [SOUND].
2 Press [3, 4] to select "2CH SOURCE" or
R
dB
0
SW
3 While the selected mode is displayed
≥ The sound effects/modes may not be available or have no
≥ You may experience a reduction in sound quality when
Surround Effects
Press [3, 4] to select the desired setting.
( 34)
setting mode.
the speaker.
≥ Press [2, 1] to adjust the balance of the
front speakers.
adjust the speaker level for subwoofer.
s6 dB to r6 dB
Sound Effects
"ALL SOURCE", and then press [OK].
e.g.,
Press [3, 4] to select the desired setting and
press [OK].
Repeat this procedure if necessary. (
effect with some sources.
these sound effects/modes are used with some sources. If
this occurs, turn the sound effects/modes off.
34)
34)
41
VQT3Z99