Specifications; General Safety Rules - Makita BJV140 Instruction Manual

ENGLISH

SPECIFICATIONS

Length of stroke
Max. cutting capacities
Strokes per minute (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
For Model BJV140
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 79 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
Wear ear protection.
The typical weighted root mean square acceleration
2
value is 6 m/s .
These values have been obtained according to
EN60745.
Model
Wood
Mild steel
Aluminum
-1
)
Overall length
Net weight
Rated voltage
equipment and
environmentally compatible
BJV140
26 mm
135 mm
10 mm
20 mm
0 - 2,600
255 mm
2.7 kg
D.C. 14.4 V
END004-1
For Model BJV180
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 81 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
The typical weighted root mean square acceleration
value is 5.5 m/s
These values have been obtained according to
EN60745.
its
EC-DECLARATION OF CONFORMITY
Model; BJV140, BJV180
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745,
ENE019-1
Directives, 2004/108/EC, 98/37/EC.
000230
Responsible Manufacturer:
ENG004-2
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND

General Safety Rules

WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the
2
Wear ear protection.
2
.
EN55014 in accordance
CE2006
Tomoyasu Kato
Director
BJV180
26 mm
135 mm
10 mm
20 mm
0 - 2,600
257 mm
2.8 kg
D.C. 18 V
ENG004-2
ENH102-6
with Council
GEA002-3