Panasonic Lumix DMC-GF5X Basic Operating Instructions Manual page 40

[Touch Settings]
[Touch Scroll]
[Menu Resume]
[Pixel Refresh]
[Sensor Cleaning]
[Shoot w/o Lens]
∫ Setup Menu
This menu lets you perform the clock settings, select the operating beep tone settings and
set other settings which make it easier for you to operate the camera.
[Clock Set]
[World Time]
[Travel Date]
[Beep]
[Volume]
[LCD Display]
[LCD Mode]
[Economy]
[Auto Review]
[USB Mode]
[Output]
[VIERA Link]
[3D Playback]
40
VQT4F91 (ENG)
Enables/disables the Touch operation.
This allows you to set the speed of continuously forwarding or
rewinding pictures using touch operation.
Stores the location of the last-used menu item for each menu.
It will perform optimization of imaging device and image
processing.
Dust reduction to blow off the debris and dust that have affixed
to the front of the imaging device is performed.
Sets whether or not the shutter can be released when no lens
is attached to the main body.
Setting Date/Time.
Sets the times for the region where you live and your holiday
destination.
Departure date and return date of the travel as well as the
name of the travel destination can be set.
Set the volume of the focus confirmation beep, the self-timer
beep and the alarm beep.
Adjust the volume of the speaker to any of 7 levels.
Brightness, colour, or red or blue tint of the LCD monitor is
adjusted.
The brightness of the LCD monitor can be adjusted depending
on how bright it is around the camera.
Suppresses the unit power consumption to prevent the battery
being run down.
Set the length of time that the picture is displayed after taking
the still picture.
Sets the communication method when connecting using the
USB connection cable (supplied).
This sets how the unit connects to a television etc.
Equipment that supports the VIERA Link will connect
automatically.
Setup the output method for 3D pictures.