Panasonic Lumix DMC-GF5X Basic Operating Instructions Manual page 38

[Long Shtr NR]
[Shading Comp.]
[Ex. Tele Conv.]
[Digital Zoom]
[Burst Rate]
[Auto Bracket]
[Self Timer]
[Color Space]
[Stabilizer]
[Recommended Filter]
∫ [Motion Picture] Mode Menu
This menu lets you set the [Rec Mode], [Rec Quality], and other aspects for motion picture
recording.
•
[Photo Style], [Focus Mode], [Metering Mode], [i.Resolution], [i.Dynamic] and [Digital Zoom] are
common to both the [Rec] Mode menu and [Motion Picture] Mode menu. Changing these
settings in one of these menus is reflected in other menu.
–
For details, refer to the explanation for the corresponding setting in [Rec] Mode menu.
[Rec Mode]
[Rec Quality]
[Continuous AF]
[Ex. Tele Conv.]
[Wind Cut]
[Mic Level Disp.]
[Mic Level Adj.]
[Flkr Decrease]
38
VQT4F91 (ENG)
You can eliminate the generated noise by recording with a
slower shutter speed.
If the screen periphery darkens as a result of lens
characteristics, the brightness in this region will be corrected.
When the number of pixels is set to anything other than [L], the
Tele effect is increased without degradation in image quality.
Increases the Tele effect. The higher the level of magnification,
the greater the degradation in image quality.
Sets the burst speed for burst recording.
Sets single/burst recording, correction width and recording
sequence for Auto Bracket recording.
Sets the time until recording for self-timer recording.
Set this when you want to correct the colour reproduction of the
recorded pictures on a PC, printer etc.
When camera shake is sensed during recording, the camera
corrects it automatically.
This sets whether to display the camera-recommended effects
in Intelligent Auto (
Sets the file format for the motion pictures you record.
This sets up the picture quality of motion pictures.
Continues to focus on the subject for which focus has been
achieved.
If the [Rec Quality] is set to other than [FSH] and [FHD], the
Tele effect is increased.
This prevents the recording of wind-noise automatically.
Set whether or not the mic levels are displayed on the screen.
Adjust the sound input level to 4 different levels.
The shutter speed can be fixed to reduce the flicker or striping
in the motion picture.
or ) Mode.