Receiving A Message; Guide To Sms Settings - Panasonic KX-FC228FX Operating Instructions Manual

3. Telephone
4
To send the message, press {j/OK}. i "Send"
i {>}
5
Press and hold {C/T} to erase all numbers, then
continue from step 4, "3.15.1 Writing and sending a
new message", page 25.
3.15.3 Editing and sending a saved
message
1
{j/OK} i "SMS" i {>}
2
"Send List" i {>}
3
Press {^} or {V} repeatedly to select the message.
i {j/OK}
4
{j/OK} i "Edit Message" i {>} i
Continue from step 3, "3.15.1 Writing and sending a
new message", page 25.
3.15.4 Erasing saved messages
1
{j/OK} i "SMS" i {>}
2 "Send List" i {>}
3
Press {^} or {V} repeatedly to select the message.
i {j/OK}
4
{j/OK} i "Erase" i {>}
L To erase all messages, select "Erase All".
i {>}
5
"Yes" i {>} i {ih}

3.16 Receiving a message

When an SMS message is received:
– a tone is heard (if the cordless handset ringer is
turned on)
– "Receiving SMS Message" is displayed
– F is displayed
– the message indicator on the cordless handset
flashes if the message alert feature (page 49) has
been turned on
3.16.1 Reading a received message
1
{j/OK} i "SMS" i {>}
2
"Receive List" i {>}
3
Press {^} or {V} repeatedly to select a message.
L Messages which have already been read are
indicated by a "Q", even if they were read using
another cordless handset.
4
Press {j/OK} to read the message content.
Note:
L To call the message sender, press {C} or {s}.
3.16.2 Replying to a message
1
While reading a received message, press {j/OK}.
2
"Reply" i {>}
26
3
Enter a message (page 55). i {j/OK}
4
Edit the destination phone number and/or press
{j/OK}.
5
Continue from step 5, "3.15.1 Writing and sending a
new message", page 25.
Editing/forwarding a message
1. While reading a received message, press {j/OK}.
2. "Edit Message" i {>}
3. Continue from step 3, "3.15.1 Writing and sending a
new message", page 25.
3.16.3 Erasing received messages
1
While reading a received message, press {j/OK}.
2
"Erase" i {>}
L To erase all messages, select "Erase All".
i {>}
3
"Yes" i {>} i {ih}
3.16.4 Storing the sender's number in the
cordless handset phonebook
1
While reading a received message, press {j/OK}.
2 "Add Phonebook" i {>}
3
Continue from step 3, "3.3.1 Storing phonebook
items", page 20.
3.16.5 Editing the sender's number before
calling back
1
While reading a received message, press {j/OK}.
2 "Edit and Call" i {>}
3
Edit the number. i {C} / {s}

3.17 Guide to SMS settings

3.17.1 Storing the PBX line access number
(for PBX users only)
Store your PBX line access number up to 4 digits so that
SMS messages are sent properly. When sending SMS
messages to items in the cordless handset phonebook
or redial list, the PBX line access number will be deleted.
1
{j/OK} i "SMS" i {>}
2
"Settings" i {>}
3
"PBX Access No." i {>}
4
"On" i {>}
5
Enter your PBX line access code and a dialling
pause, if necessary. i {j/OK}
6
"Save" i {>} i {ih}