Selecting A Preferred Bearer; Personalising Your Connection Settings - Mitsubishi TRIUM ECLIPSE User Manual

Selecting a preferred bearer*

When defining mixed (Circuit+Packets) based profiles, you have to select the
first bearer to use when starting a connection.
To select a preferred bearer,

Personalising your connection settings

The following user settings are available enabling you to optimise the be-
haviour of your phone whilst connected to the internet.
User preferences +
User preferences +
User preferences +
User preferences +
User preferences +
Accept provisioning
* GPRS availability is operator dependent
56
4
1. You can also access the Internet menu directly by pressing the Internet softkey from the standby display
(provided you haven't personalised the left softkey).
2. If the PPP access phone number, login names and password, Home page http address and IP address
are not predefined, these are obtainable from your network operator and/or internet provider.
3. Selecting PPP Access or Proxy again will allow you to change and/or modify any of your settings.
1
Press . Select Internet.
Select Settings. Select User Preferences.
2
3 Select Preferred bearer (Circuit or Packets). Press End
and select Yes.
4
Press Exit
4
This setting applies to all mixed profiles.
1
. Select Internet. Select Settings.
Press
2 Scroll to the following items and turn On or Off as required:
Option
Clear cache
Clear address list
Full screen
Zoom +/-
Scripting
Preferred bearer *
3 Press Exit
or to return to the standby display.
During a live Internet session some of the in-
formation and services you have accessed have
been 'stored' in an area of memory called the
cache. This memory can be cleared
Selecting this item will clear the last five ad-
dresses entered in the URL list
Used to configure the browser to display pages
in full screen mode or not
Used to configure the browser to display pages
in larger, medium or smaller font
Used to allow or forbid the use of scripts exe-
cution of scripts including in WAP™ pages
Used to select the bearer to use when making
WAP™ sessions (Circuit or Packet)
Used to define the incoming of Push messages
(Never, Current profile, All profiles or Al-
ways)
or to return to the standby display.
Action