Connectivity; Infrared Port; Opening The Infrared Port; Closing The Infrared Port - Mitsubishi TRIUM ECLIPSE User Manual

Connectivity

Infrared port

The infrared port allows you to exchange data between your mobile and other de-
vices (provided they have an infrared port).
To initiate a transfer via the infrared port, your mobile must be placed facing an-
other infrared port before port opening starts.
The two ports can then be opened and synchronised. The requested transfer can
then be performed. Objects (vCards e.g.) are transferred one by one.

Opening the infrared port

Opening the infrared port allows you to receive information via this port.
Once opened, the infrared port can be used for any kind of transfer. The
infrared port is automatically disconnected after some time.
You have to open the infrared port if you want to receive data via your
infrared port or if you want to transfer non-structured data via the infra-
red port (such as a fax or file transfer to the network for instance).
To open the infrared port,
1
Press
Select Infrared port.
2
3 Select Open. Confirmation will be displayed.
played on top of the standby display.
When the infrared port is open, objects can be received. When an object is
received, the idle screen is masked by the new object reception status.

Closing the infrared port

Closing the infrared port closes all infrared sessions (OBEX and IrCOMM
sessions).
To close the infrared port,
1
Press
Select Infrared port.
2
Select Close. Confirmation will be displayed.
3
Transferring a phonebook card via the infrared port
You can transfer phonebook cards via the infrared port:
1
Place your mobile opposite the other device infrared port.
2
Open the other device infrared port.
3
Select the card you wish to transfer as explained in section
Viewing and calling numbers in the phonebook, page 8.
Press Options
4
first be opened. The transfer will then be performed.
5
When the transfer is complete the phone returns to the phone-
book card display.
Press Exit
6
. Select Connectivity.
. Select Connectivity.
. Select Send by IrDA. The infrared port will
or to return to the standby display.
will be dis-
51