Settings; Tones; Alert Mode - Mitsubishi TRIUM ECLIPSE User Manual

Settings

Tones

Alert mode

To avoid disturbing others you can turn off the audible incoming ring tone
as well as all alert and alarm tones from the Alert tones menu.
To modify the alert mode,
1
Press
2
Select Tones.
3
Select Alert tones.
Select Ring, Silent, Vibrate, Vibrate & ring or Vibrate then
4
ring to validate your choice.
Press Exit
5
Ring tone selection
You can choose the sound of the incoming ring tone from a selection of
30 ring tone melodies stored in the phone and downloaded melodies
which can be stored depends on the memory left.
To hear your chosen ring tone melody, wait several seconds before con-
firming your choice. The melody will be played.
Ring tone selection is made through the Settings menu:
1
Press
2
Select Tones.
3 Select Melodies.
To help you identify incoming calls you can give the Standard/
4
Line 1 and Line 2 (network dependent) calls as well as the
Alarm different ring tones.
Use
select it.
5
Use
select the current tone.
Press Exit
6
Downloaded melodies
You can download melodies from the internet using the procedure de-
scribed page 61.
4
If you choose the 'Vibrate' or 'Vibrate then ring' option, the vibrating option replaces all the alert
and alarm tones.
. Select Settings.
or
4
You can access the Alert tones menu directly from the standby display, using .
If you select Ring but the ring tone volume is off the icon appears.
The ring tone volume off setting is saved when the phone is turned off.
When the phone is connected to either the Desk Top Charger, HF kit, CLA or AC adaptor the vibrator
mode selection is temporarily inhibited and the phone will ring instead.
. Select Settings.
or to highlight the required call type and press
or to listen to the different ring tones. Press
or
to return to the standby display.
to return to the standby display.
to
to
23