Liquid Damage - Panasonic KX-TG6811E Operating Instructions Manual

Digital cordless phone and digital cordless answering system
Hide thumbs Also See for KX-TG6811E:
Table of Contents

Advertisement

Problem
I cannot operate the
answering system
remotely.
The unit does not emit the
specified number of rings.

Liquid damage

Problem
Liquid or other form of
moisture has entered the
handset/base unit.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
TG68xxE(en)_1225_ver012.pdf
Cause/solution
R The remote access code is not set. Set the remote access
code (page 40).
R You are entering the wrong remote access code. If you have
forgotten your remote access code, enter the remote access
code setting to check your current code (page 40).
R The answering system is turned off. Turn it on (page 41).
R If the first ring is turned off, the number of rings decreases by 1
from the specified number of rings.
Cause/solution
R Disconnect the AC adaptor and telephone line cord from the
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorised service centre.
51
Useful Information
2012/12/25
16:30:14
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents