On Screen Messages - Panasonic Viera TX-32LZD80 Operating Instructions Manual

On screen messages

Message
All tuning data will be erased
Are you sure ?
Are you sure you want to delete this timer ?
Press OK to delete timer
Press RETURN to return
Bad Signal
Feature not available
Invalid operation - Please check settings and
connections
Invalid system time. Please exit !
Max. number of Timers already set !
New DVB Service Found!
Press OK start Auto Setup
Press EXIT to Ignore.
Selecting Auto Setup will delete
current Profi le and Childlock settings
New version 1.90 found.
Do you really want to update the
software and reboot the system ?
Press OK to download the new version
Press EXIT to Ignore
No module inserted
No Recording - Check media
No Recording - Already recording
No Recording - Unknown reason
No Service
Meaning / Action
•
"Shipping Condition" will erase all tuning data (p. 34).
•
"Auto Setup" will be erased all present DVB or Analogue tuning
datas (p. 33).
•
Confi rm correct operation.
•
Confi rm correct operation.
•
The signal is weak. Check the aerial.
•
It is not possible to record these sources (COMPONENT / HDMI / PC).
•
Check the Q-Link or VIERA Link connection and setting (p. 42 - 44).
•
Cannot get the time information. Check the connection of the RF
cable.
•
The maximum number of timer programming events is 15.
•
There is a new DVB service or programme.
•
There is a new software available.
•
Check the CI module inserted completely (p. 29).
•
The tape or disc may be "write protected", missing or damaged.
•
The equipment may already be recording.
•
The recording cannot be done by any reason. Check the
equipment.
•
Disc or tape may be full.
•
The broadcaster stops the services.
55