Auto Setup - Panasonic Viera TX-32LZD80 Operating Instructions Manual

Auto Setup

Search and store TV programmes automatically.
These steps are not necessary if the setup has been completed by your local dealer.
INPUT
OPTION SD CARD
RETURN
TV
10
1
EXIT
2
3
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
Auto Setup - Digital and Analogue
Digital Scan 21
Analogue Scan 21
This will take about 6 minutes.
Channel Service Name
62 CBBC Channel
62 BBC Radio Wales
62 E4
62 Cartoon Nwk
29
33 BBC1
Free TV: 4 Pay TV: - Radio: - Data: -
Searching
EXIT
Sending Preset Data
Please wait!
0%
Remote control unavailable
When inputting Owner ID
Owner ID
Please enter new PIN
PIN
* * * *
EXIT
PIN entry
0 9
RETURN
When inputting Owner ID later
EXIT
Select the picture setting
Please select your viewing environment.
Home Shop
•
"Shop" and "Home" are equal
to "Dynamic" and "Normal"
respectively - "Viewing Mode" in
"Picture Menu" (p. 24)
Auto Setup is now complete and your TV is ready for viewing.
•
You can now use the remote
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
•
Auto Setup will start to search for
68
TV programmes and store them in
68
the numbered order as specifi ed
Type Quality
Free TV 10
by the broadcasters.
Free TV 10
Free TV 10
Free TV 10
Analogue
-
Analogue
-
Analogue: 2
•
If Q-Link, or similar technology
(p. 43), compatible recorder is
100%
connected, analogue programme
information is automatically
downloaded to the recorder.
(Digital programme information is
not downloaded.)
Following the on-screen operation
guide, enter your own choice of PIN
number, name, etc.
•
For detailed procedures
"Owner ID" (p. 35)
•
Make a note of the PIN number
in case you forget it.
•
If you input the ID later
"Owner ID" (p. 35)
•
To check programme list
at-a-glance
"Using TV Guide" (p. 18)
•
To edit programmes
"Editing Programmes" (p. 30)
select
set