Panasonic Viera TX-32LZD80 Operating Instructions Manual page 56

On screen messages
No Signal
PIN incorrect !
Please check aerial or local
DVB service availability.
Press OK to start Auto Setup
Please check settings and connections on
HDMI devices.
Please wait.
Recording this service now
Sending Preset Data Please wait !
Shipping condition completed.
TV can now be switched off.
Software successfully updated
Press EXIT to continue
Software Update failed. Please try again later.
Press EXIT to continue
This service is locked !
Press OK to enter PIN
Timer already expired !
Timer Event Due to Start
DVB 1: BBC1 has been
Programmed for recording at 20:00
Timer incorrect !
Tuner Locked
Please stop recording to operate
Unable to download, Check Equipment
56
Message Meaning / Action
•
Check the connection of the RF cable.
•
The PIN number you entered is wrong.
•
Please follow the message.
If it is still failed, consult your local Panasonic dealer.
•
Communication error in VIERA Link function (p. 44).
•
A function is in progress.
•
The recorder is recording the programme signal from its own tuner.
You can turn the TV off and leave the equipment recording in the
normal way.
•
Q-Link or VIERA Link programme download is in progress.
•
"Auto Setup" will automatically start when Mains power On / Off
switch is next turned On. (p. 10)
•
The software updating is fi nished.
•
Perform "System Update Search Now" in System Update (p. 29).
If it is still failed, there may not be the new software.
•
The selected programme is locked in Child Lock (p. 31).
•
Starting time in Timer Programming is already past. Set correctly
(p. 39).
•
This message will appear 2 minutes before timer programming
event due to start.
•
Set Starting and Ending times in Timer Programming correctly
(p. 39).
•
If you want to unlock, cancel Direct TV Recording (p. 43 and p. 45)
or Timer Programming (p. 38).
•
The tape or disc is active. Stop the equipment and try again.