Registering A Unit; Additional Handsets - Panasonic KX-TG7861E Operating Instructions Manual

Storing unwanted callers
You can store up to 30 phone numbers in the
call barred list.
Important:
R You must store the phone number with an
area code in the call barred list.
n From the caller list:
1
MCN ( )
2
MbN: Select the entry to be barred. a
M N a M N
3
MbN: "Save CID" a MOKN
4
MbN: "Caller Barred" a MOKN
5
MbN: "Yes" a MOKN a MeN
n By entering phone numbers:
1
M N (right soft key) #217 a
M N
2
Enter the phone number (24 digits
max.). a MOKN
R To erase a digit, press MCN.
3
MeN
Viewing/editing/erasing bar call
numbers
1
M N (right soft key) #217
2
MbN: Select the desired entry.
R To exit, press MeN.
3
To edit a number:
M N a Edit the phone number. a
MOKN a MeN
To erase a number:
M N a MbN: "Yes" a MOKN a MeN
Note:
R When editing, press the desired dial key to
add, MCN to erase.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
TG78xxE(en)_1225_ver011.pdf
1
2
3
4
5
6
Changing the base unit PIN
(Personal Identification Number)
Important:
R If you change the PIN, please make note of
1
2
3
4

Registering a unit

Operating additional units

Additional handsets

Up to 6 handsets can be registered to the
base unit.
29
Programming
M N (right soft key) #256
Enter the base unit PIN (default: "0000").
R If you forget your PIN, see page 45.
Select the handsets to be restricted by
pressing 1 to 6.
R All handsets registered to the base unit
are displayed.
R " " is displayed next to the selected
handset numbers.
R To cancel a selected handset, press
the same dial key again. " "
disappears.
MOKN
Select a memory location by pressing 1
to 6. a MOKN
Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
MeN
R To erase a restricted number, press
MCN.
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 45.
M N (right soft key) #132
Enter the current 4-digit base unit PIN
(default: "0000").
Enter the new 4-digit base unit PIN. a
MOKN
MbN: "Yes" a MOKN a MeN
2012/12/25 12:25:50
29