Night Mode - Panasonic KX-TG7861E Operating Instructions Manual

Digital cordless answering system
Hide thumbs Also See for KX-TG7861E:
Table of Contents

Advertisement

Programming
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.

Night mode

Night mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set for each handset.
Important:
R Set the date and time beforehand
(page 15).
R We recommend turning the base unit ringer
off (page 24) in addition to turning the night
mode on.
R If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
1
M
N (right soft key) #238
2
MbN: Select the desired setting. a MOKN
R If you select "Off", press MeN to
exit.
3
Enter the desired hour and minute you
wish to start this feature. a MOKN
R You can select 24-hour or 12-hour
clock format ("AM" or "PM") by
pressing *.
4
Enter the desired hour and minute you
wish to end this feature. a MOKN
5
MeN
R When the night mode is set,
displayed.
Changing the start and end time
1
M
N (right soft key) #237
2
Continue from step 3, "Turning night
mode on/off", page 28.
Setting the ring delay
This setting allows the handset to ring during
night mode if the caller waits long enough.
28
TG78xxE(en)_1225_ver011.pdf
is
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
28
After the selected amount of time passes, the
handset rings. If you select "No Ringing",
the handset never rings during night mode.
1
M
N (right soft key) #239
2
MbN: Select the desired setting. a MOKN
a MeN
Note:
R When the answering system answers the
call, this feature does not work.
Changing the handset name
Each handset can be given a customised
name ("Bob", "Kitchen", etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is "No". If you select
"Yes" without entering any handset name,
"Handset 1" to "Handset 6" is displayed.
1
M
N (right soft key) #104
2
Enter the desired name (max. 10
characters; page 41).
R If not required, go to step 3.
3
MOKN
4
MbN: Select the desired setting. a MOKN
2 times
5
MeN
Incoming call barring (Caller ID
subscribers only)
This feature allows the unit to reject calls from
specified phone numbers that you do not want
to answer such as junk calls.
When a call is received, the unit does not ring
while the caller is being identified. If the phone
number matches an entry in the call barred
list, the unit emits no sound to the caller, and
disconnects the call.
Important:
R When the unit receives a call from a
number that is stored in the call barred list,
the call is logged in the caller list
(page 32) with
after the call is
disconnected.
2012/12/25
12:25:50

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tg7863eKx-tg7862eKx-tg7864e

Table of Contents