TG8611FX(e-e).book Page 30 Friday, June 3, 2011 11:23 AM
Programming
list, the call is logged in the caller list
(page 38) with 7 after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in
the call barred list.
Important:
L You must store the phone number
with an area code in the call barred
list.
■ From the caller list:
1
{3} (y)
2
{r}: Select the entry to be barred.
s M s I
3
{r}: "Caller Barred" s M
4
{r}: "Yes" s M s {ic}
■ By entering phone numbers:
1
1 (middle soft key) y217
s m
2
Enter the phone number (24
digits max.). s M
L To erase a digit, press ^.
3
{ic}
Viewing/editing/erasing bar call
numbers
1
1 (middle soft key) y217
2
{r}: Select the desired entry.
L To exit, press {ic}.
3
To edit a number:
~ s Edit the phone number. s
M s {ic}
To erase a number:
W s {r}: "Yes" s M s
{ic}
Note:
L When editing, press the desired dial
key to add, ^ to erase.
30
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign
up to 6 phone numbers to be restricted,
and select which handsets are to be
restricted. Storing area codes here
prevents the restricted handsets from
dialling any phone number in that area
code.
1
1 (middle soft key) y256
2
Enter the base unit PIN (default:
"0000").
L If you forget your PIN, contact an
authorised service centre.
3
Select the handsets to be restricted
by pressing 1 to 6.
L All handsets registered to the
base unit are displayed.
L "Q" is displayed next to the
selected handset numbers.
L To cancel a selected handset,
press the same dial key again.
"Q" disappears.
4
M
5
Select a memory location by
pressing 1 to 6. s M
6
Enter the phone number or area
code to be restricted (8 digits max.).
s M s {ic}
L To erase a restricted number,
press ^.
Changing the base unit PIN
(Personal Identification
Number)
Important:
L If you change the PIN, please make
note of your new PIN. The unit will not
reveal the PIN to you. If you forget
your PIN, contact an authorised
service centre.