Changing Dehumidifier Settings; Changing Ventilation Settings - Honeywell TrueIAQ Owner's Manual

Changing dehumidifier and ventilation settings
Note: These items will appear only if a dehumidifier is installed. If both a humidifier
and dehumidifier are installed, these settings will appear after pushing "More" from the
humidifier operation style screen.
1. Set dehumidifier by pressing the UP/DOWN arrows. RH% will change
in increments of five.
2. Press "More" to enter operation style. Press the UP/DOWN arrows to
set.
• "Auto" runs dehumidifier automatically according to your RH%
settings.
• "Off" turns the dehumidifier off.
3. Press "Done" to save settings, or "More" to enter ventilation settings.
Note: These items will appear only if a ventilator is installed.
1. Use the UP/DOWN arrows to run ventilation temporarily. Range is
from 20 to 480 minutes, in 20-minute increments.
2. Press "More" again to enter operation style.
• "Auto" runs ventilation according to installer settings.
• "ON" runs ventilation continuously.
• "OFF" turns ventilation off. In this mode, ventilation will only
run if turned on by a remote switch.
3. Press "Done" to save settings, or "More" to enter time settings.
69-2072—09 6
60
%
DeHumidify
Set
M24834
Auto Off
DeHumidify
M24835
Time On
Ventilate
00 20
M24836
Auto On Off
Ventilate
M24837