System Settings - Honeywell REM5000R01 Operating Manual

System settings

Press to select
•
HEAT COOL
8:03
Press and hold either to select
AUTO
•
HEAT COOL
8:03
Note: The Auto Changeover option
is available only if programmed by
the system installer.
Note: Emergency Heat can only be
set at the thermostat.
OFF
AM
AUTO CHANGEOVER
OFF
AM
Press a button to select:
SYSTEM
• Heat: Thermostat controls only the
heating system.
• Cool: Thermostat controls only the
cooling system.
• Off: Heating and cooling systems
are off.
Press and hold
HEAT
to select Auto Changeover (thermostat
automatically selects heating or cooling
depending on the indoor temperature).
In Auto Changeover mode, you can
press or
HEAT COOL
settings for each system.
To exit Auto Changeover mode, press
and hold or
HEAT
5
Wireless Remote Control
or for 3 seconds
COOL
to display or adjust the
for 3 seconds.
COOL