Placing A Call; Keypad - Mio C510 User Manual

The next time you run the Dialer program, your device will automatically search
and pair with one of the last connected mobile phones.
NOTE:
Your device must be in Pair Mode for the mobile phone to discover your device. If you
need to manually set your device to Pair Mode, tap Pair Mode on the main screen.
Some mobile phones can automatically connect the hands-free service.
Up to 8 sets of paired mobile phones can be stored. A 9th paired mobile phone will replace
the oldest one.
The Dialer program cannot access the data such as the phone book and call history stored
in a connected mobile phone.

6.3 Placing a Call

After pairing with your mobile phone, you can place a call using any of the four
buttons ( ,

Keypad

Keypad
By tapping the
telephone number with the onscreen keypad. After entering the telephone number,
tap to place the call.
NOTE:
To delete the last digit entered, tap the Backspace button.
The other two buttons allow you to switch to Contact and Call History screens.
,
Contact Call History
button on the Dialer main screen, you can enter the
Keypad
, and ) on the Dialer main screen.
Redial
45