Advertisement
Supplied accessories
1 AC adaptor (for multi cradle): DE-890DA
1 AC mains lead (for AC adaptor)
The United Kingdom: RJA0053-3X
Australia and N.Z.: RJA0035-K
China: RJA0055-1K /Other areas: RJA0019-2X
1 Multi cradle
China: RFE0116B /Other areas: RFE0116C
1 Pair of stereo earphones: L0BAB0000172
1 USB cable: K1HA12BD0001
1 External microphone (monaural): L0FBBA000002
1 CD-ROM (Voice Editor 3)
1 Nickel-metal hydride rechargeable battery (Recommended replacement: HHR-4AH)
For areas except Europe and China:
1 Power plug adaptor: K2DA42E00001
≥Use numbers indicated when asking for replacement parts.
Note
The included AC mains lead is for use with this unit only. Do not use it with other equipment.
For the United Kingdom and Republic of Ireland:
≥Order accessory and consumable items for your product with ease and confidence by telephoning our
Customer Care Centre Mon–Friday 9:00am–5:30pm. (Excluding public holidays.)
≥Or go on line through our Internet Accessory ordering application.
≥Most major credit and debit cards accepted.
≥All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd.
≥It couldn't be simpler!
Customer Care Centre
For UK customers: 08705 357357
For Republic of Ireland customers: 01 289 8333
Technical Support
For UK customers: 0870 1 505610
This Technical Support Hot Line number is for Panasonic PC software related products only.
For Republic of Ireland, please use the Customer Care Centre number listed above for all enquiries.
For all other product related enquiries, please use the Customer Care Centre numbers listed above.
Power supply
Rechargeable battery
1
Insert the battery.
2
Recharge.
Except for Europe, Australia,
N.Z. and China
If the power plug will not fit
your socket, use the power
plug adaptor.
To household
DC IN jack
mains socket
AC mains lead
AC adaptor
For the United Kingdom only
Be sure to read the caution for the AC mains
lead on page 11 before connection.
THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT
AND SHALL BE EASILY ACCESSIBLE.
≥You can use the unit while the battery is recharging.
Recharge while the unit is stopped (page 6-7) to fully recharge.
≥You can recharge Panasonic rechargeable battery even if it is only partially drained.
≥You can recharge the battery about 300 times. It has reached the end of its useful
life if play time dramatically reduces after recharging.
≥Disconnect the AC adaptor to save power if you are not going to use the unit for a long time.
≥The unit is in the standby condition when the AC adaptor is connected. The primary
circuit is always "live" as long as the AC adaptor is connected to an electrical outlet.
Dry cell battery (not included)
Use a long life "AAA, LR03, AM-4" alkaline battery.
≥Insert the same way as the rechargeable battery.
Multi cradle and AC adaptor
Insert either a rechargeable or dry cell battery.
≥The multi cradle works on AC and the main unit works on the battery.
When using a rechargeable battery, it is recharged as you use the unit so you can
use it over a longer time.
When using a dry cell battery, you can use the unit until the battery goes flat.
www.panasonic.co.uk (for UK customers only)
Recharge before first use.
1
2
Start:
"CHARGE" lights
;
Finish:
"CHARGE" goes out
(approx. 2.5 hours)
Insert so
"CHARGE"
lights.
2
The battery indicator (displayed during operation)
FULL
If you operate the unit in the cradle
while a dry cell battery is inserted,
the whole indicator flashes.
Hold function
This causes the unit to ignore accidental button presses.
You cannot operate the mutli cradle if hold is on.
Hold mode
∫
To save the battery
While stopped, switch to hold so the display turns off.
Setting the time
The year (2003) starts flashing on the display after you insert a battery.
(See "Correcting the time settings" below if it doesn't.)
Repeat the SELECT ) SET steps to set the clock.
The clock has a monthly accuracy of i/j 60 seconds at room temperature.
[ $ FOLDER/
1
SELECT
% MENU]
Year
Month
Day
M
D
M
D
Correcting the time settings
1. While stopped, press and hold [ $ FOLDER/ % MENU] until "HQ SP LP" appears.
Do each of the following within 10 seconds
2. Press [:,9] until "yEAr" appears.
3. Press [1/∫].
4. Follow the above steps to change the setting you want to correct.
≥Start from the beginning again if the display returns to the clock partway through.
≥Press [ $ FOLDER/ % MENU] for two seconds to stop partway through.
Turning the operation beep on and off
[ $ FOLDER/
% MENU]
≥Start from the beginning again if the display returns to the clock partway through.
≥Press [ $ FOLDER/ % MENU] for two seconds to stop partway through.
Replace the battery
EMPTY
when the indicator
flashes.
Change the battery
within 20 seconds to
preserve memory
items.
Lights for about
Release
two seconds
2
SET
Within 10 seconds
12 or 24 hour
Time
Clock
HQ
A
AM
AM
Starts flashing
when finished
1 While stopped, press and
hold [ $ FOLDER/ % MENU]
until "HQ SP LP" appears.
Do each of the following
within 10 seconds
2 Press [:,9] until
"bEEP" appears.
3 Press [1/∫].
4 Press [:,9] to select
"bE On" or "bE OFF".
5 Press [1/∫].
3
Advertisement
