Inserting The Batteries; Control Guide; Hold Function; Supplied Accessories - Panasonic RR-QR150 Operating Instructions Manual

Supplied accessories

RR-QR153
External microphone (monaural) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .L0FBBA000002
Soft case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RFC0075-K
2 Alkaline dry cell batteries
≥Use numbers indicated when asking for replacement parts.
To order accessories contact 1-800-332-5368 or web site
(http://www.panasonic.com).

Control guide

1 Built-in microphone
2 Meter
3 Display
4 Folder, Menu button
[$FOLDER / %MENU]
5 Play, stop, fast forward,
rewind, and select button
[1,∫,:,9]
6 Speaker
? Handstrap hole

Hold function

This causes the unit to ignore accidental button presses.
Hold mode
0
50
100
∫ To save the batteries
While stopped, switch to hold so the display turns off.
7 Recording indicator
8 Recording button
[REC]
0
50
100
9 Stop button [STOP]
: Hold switch [HOLD]
; Volume control [VOL]
< Recording mode
button [REC MODE]
= Erase button
[ERASE]
> Microphone
sensitivity switch
[MIC SENSE, H, L]
@ External microphone jack
[MIC (PLUG IN POWER)]
A Earphone jack [#]
B Battery cover
Release
Lights for about
two seconds
2

Inserting the batteries

RR-QR150
Long life alkaline batteries are recommended.
Two AAA, R03/LR03, UM-4
batteries
≥If rechargeable batteries are to be used, rechargeable batteries manufactured
by Panasonic are recommended.
The battery indicator (displayed during operation)
FULL
≥Change the batteries within 30 seconds to preserve memory items.
Setting the time
The year (2003) starts flashing on the display after you insert a battery.
(See "Correcting the time settings" below if it doesn't.)
Repeat the SELECT ) SET steps to set the clock.
The clock has a monthly accuracy of i/j 60 seconds at room temperature.
1
0
50
100 [STOP]
Year Month Day
M D M D
Correcting the time settings
1. While stopped, press and hold [ $ FOLDER/ % MENU] until the display changes.
Do each of the following within 10 seconds
2. Press [ $ FOLDER/ % MENU] until the year (e.g. 2003) appears.
3. Follow the above steps to change the setting you want to correct.
≥Start from the beginning again if the display returns to the clock partway through.
≥Press [STOP] or [∫] to stop partway through.
Turning the operation beep on and off
[ $ FOLDER/ % MENU]
0
50
100
[STOP]
EMPTY
Replace the
batteries when
the indicator
flashes.
SELECT 2 SET
Within 10 seconds
12 or 24 hour Time Clock
HQ
A
AM
AM
Starts flashing
when finished
1 While stopped, press and
hold [ $ FOLDER/ % MENU]
until the display changes.
Do each of the following
within 10 seconds
2 Press [ $ FOLDER/ % MENU]
until "bEEP" appears.
3 Press [:,9] to select
"bE On" or "bE OFF".
4 Press [1].
≥Start from the beginning again if the
display returns to the clock partway
through.
≥Press [STOP] or [∫] to stop partway
through.
3