Adjusting Picture Position/Size - Panasonic TH-42PW6 Operating Instructions Manual

Adjusting PICTURE POSITION/SIZE

Adjusting screen
PICTURE
1 POS. /SIZE
2
During "VIDEO (S VIDEO)" and
"COMPONENT" input signal.
PICTURE POS./SIZE
NORMALIZE
NORMAL
H-POS
H-SIZE
V-POS
V-SIZE
3
R
When the Position Left " " button is pressed
H-POS
When the Position Left " " button is pressed
H-SIZE
When the Position Left " " button is pressed
V-POS
When the Position Left " " button is pressed
V-SIZE
Flickering and distortion can be eliminated by using the Position Left " " or Right " " button to
CLOCK PHASE
(RGB/PC in Mode) carry out adjustment.
Helpful Hint (
While the PICTURE POS./SIZE display is active, if either the N button on the remote control is pressed at any time or the
(ACTION button) is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings.
20
Press to display the PICTURE POS./
SIZE menu.
Press to select H-POS/H-SIZE/V-POS/
V-SIZE/CLOCK PHASE.
During "RGB/PC" and "DVI"
input signal.
PICTURE POS./SIZE
NORMALIZE
NORMAL
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK PHASE
Press to adjust POS./SIZE.
Press to exit from adjust mode.
N /
NORMALIZE
Notes:
(1) Adjustment details are memorized separately
for different input signal formats (Adjustments
for component signals are memorized for 525
(480) / 60i · 60p, 625 (575) / 50i · 50p, 1125
(1080) / 60i · 50i · 24p · 24sF, 1250 (1080) / 50i,
750 (720) / 60p · 50p each, and RGB/PC/DVI
signals are memorized for each frequency.)
(2) If a "Cue" or "Rew" signal from a VCR or DVD
player is received, the picture position will
shift up or down. This picture position
movement cannot be controlled by the
PICTURE POS./SIZE function.
When the Position Right " " button is pressed
When the Position Right " " button is pressed
When the Position Right " " button is pressed
When the Position Right " " button is pressed
Normalization)
INPUT
SURROUND
VOL
N R
PICTURE SOUND SET UP
MULTI
SWAP SELECT MOVE
PIP
PICTURE
POS. /SIZE ASPECT
PC OFF TIMER
PLASMA DISPLAY